Gui release notes - Revision history

Gosia at 20:13, 10 April 2013

2013-04-10T20:13:02Z

← Older revision		Revision as of 20:13, 10 April 2013
Line 2:		Line 2:

	=Versions 1.x=		=Versions 1.x=
		+
		+	==Version 1.3.3==
		+
		+	This is the most recent version, which can be found on the [https://github.com/adamhayes/Rachel/archive/stable_versions.zip stable-versions branch on github]

	==Version 1.3.1==		==Version 1.3.1==

Gosia: /* Changes */

2012-12-12T19:28:21Z

Changes

← Older revision		Revision as of 19:28, 12 December 2012
Line 11:		Line 11:
	===Changes===		===Changes===

-	* Auto-complete is added for filenames, so it is easier to load detector arrays, for example.	+	* Auto-complete has been added for filenames, so it is easier to load detector arrays, for example.
	* Notices are displayed automatically when a new version of Rachel is available.		* Notices are displayed automatically when a new version of Rachel is available.
	* The simulation table output contains all of the relevant data about each experiment.		* The simulation table output contains all of the relevant data about each experiment.

Gosia at 19:20, 12 December 2012

2012-12-12T19:20:06Z

← Older revision		Revision as of 19:20, 12 December 2012
Line 18:		Line 18:

	Fixed a bug that prevented proper storage of calculated errors in the matrix elements. The output of the error calculation was correct, but those error bars could not be retrieved later.		Fixed a bug that prevented proper storage of calculated errors in the matrix elements. The output of the error calculation was correct, but those error bars could not be retrieved later.
		+
		+	This version properly flushes the input buffer (stdin) before prompts, so that accidental keystrokes are ignored.

	===Known bugs and issues===		===Known bugs and issues===

Gosia: added 1.3.1

2012-12-12T18:21:30Z

added 1.3.1

← Older revision		Revision as of 18:21, 12 December 2012
Line 2:		Line 2:

	=Versions 1.x=		=Versions 1.x=
		+
		+	==Version 1.3.1==
		+
		+	===Description===
		+
		+	New features: Thick-target calculations are now fully-automated. The user is prompted if the thick target requires extra consideration, whereas, in older versions, the user would get error messages and have to fix it herself.
		+
		+	===Changes===
		+
		+	* Auto-complete is added for filenames, so it is easier to load detector arrays, for example.
		+	* Notices are displayed automatically when a new version of Rachel is available.
		+	* The simulation table output contains all of the relevant data about each experiment.
		+
		+	====Bug-fixes====
		+
		+	Fixed a bug that prevented proper storage of calculated errors in the matrix elements. The output of the error calculation was correct, but those error bars could not be retrieved later.
		+
		+	===Known bugs and issues===
		+
		+	The plots of collision functions are still not available for all multipoles.
		+
		+	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.
		+
		+	This version is not backward-compatible with the beta versions; users must re-define the experimental
		+	definitions. Level and matrix data CAN be exported from beta versions and imported to this version. All
		+	later versions are expected to preserve backward compatibility with this version.
		+	Plots of collision functions cannot be generated for all states.
		+
		+	===Recommendations===
		+

	==Version 1.3.0==		==Version 1.3.0==
Line 38:		Line 68:
	===Recommendations===		===Recommendations===

-	To migrate from a beta version to version ~~1.1.4~~, export the level scheme and matrix, then import them into a	+	To migrate from a beta version to this version, export the level scheme and matrix, then import them into a
	new session in this version.		new session in this version.

Gosia: /* Changes */

2012-11-05T20:53:35Z

Changes

← Older revision		Revision as of 20:53, 5 November 2012
Line 14:		Line 14:
	* Lifetime calculations are now fully-automated (one-click)		* Lifetime calculations are now fully-automated (one-click)
	* Vacuum deorientation calculations are now fully-automated and can be run at any time when the experimental setup is complete.		* Vacuum deorientation calculations are now fully-automated and can be run at any time when the experimental setup is complete.
		+	* Two logs have been added: a procedure log with timestamps and a user log that can be edited inside the GUI.
	* Tab-completion of filenames and paths		* Tab-completion of filenames and paths
	* Improved reading of AGS level schemes that are missing spin/parity assignments		* Improved reading of AGS level schemes that are missing spin/parity assignments

Gosia: Added v 1.3.0

2012-11-05T18:11:38Z

Added v 1.3.0

← Older revision		Revision as of 18:11, 5 November 2012
Line 2:		Line 2:

	=Versions 1.x=		=Versions 1.x=
		+
		+	==Version 1.3.0==
		+
		+	===Description===
		+
		+	New features: Thick-target calculations are now fully-automated. The user is prompted if the thick target requires extra consideration, whereas, in older versions, the user would get error messages and have to fix it herself.
		+
		+	===Changes===
		+
		+	* Thick target calculations are now fully-automated
		+	* Lifetime calculations are now fully-automated (one-click)
		+	* Vacuum deorientation calculations are now fully-automated and can be run at any time when the experimental setup is complete.
		+	* Tab-completion of filenames and paths
		+	* Improved reading of AGS level schemes that are missing spin/parity assignments
		+	* The assumed Q-value is lowered automatically when the projectile energy is too low
		+
		+	====Bug-fixes====
		+
		+	Fixed a bug that used the wrong kinematic solution for inverse kinematics in some fits. This caused inaccuracy in finding the minimum in some cases.
		+
		+	Errors are more graceful if the user tries to perform an operation before setup is complete.
		+
		+	The splash screen now renders properly.
		+
		+	===Known bugs and issues===
		+
		+	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.
		+
		+	This version is not backward-compatible with the beta versions; users must re-define the experimental
		+	definitions. Level and matrix data CAN be exported from beta versions and imported to this version. All
		+	later versions are expected to preserve backward compatibility with version 1.2.0
		+	Plots of collision functions cannot be generated for all states.
		+
		+	===Recommendations===
		+
		+	To migrate from a beta version to version 1.1.4, export the level scheme and matrix, then import them into a
		+	new session in this version.

	==Version 1.2.0==		==Version 1.2.0==
-	~~(not yet released)~~

-	===~~Expected~~ Changes===	+	===Description===
		+
		+	===Changes===

	The normalization of calculated yields to experimental yields in the GUI now matches the normalization used by Gosia. The previous Rachel versions weighted yields by their fractional errors when calculating the normalizations. This can make plotting and understanding the chi-squared values confusing. For example, when low-intensity gamma-ray yields are poorly reproduced, the high-intensity yields can appear to be poorly reproduced.		The normalization of calculated yields to experimental yields in the GUI now matches the normalization used by Gosia. The previous Rachel versions weighted yields by their fractional errors when calculating the normalizations. This can make plotting and understanding the chi-squared values confusing. For example, when low-intensity gamma-ray yields are poorly reproduced, the high-intensity yields can appear to be poorly reproduced.
Line 12:		Line 50:
	The new method in version 1.2.0 weights the individual yields' contributions to the normalization factor by their intensity only.		The new method in version 1.2.0 weights the individual yields' contributions to the normalization factor by their intensity only.

		+	This version is backward-compatible with all versions 1.0 and later.
		+
		+	See version 1.0.
		+
		+	====Bug-fixes====
		+
		+	===Known bugs and issues===
		+
		+	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.

		+	This version is not backward-compatible with the beta versions; users must re-define the experimental
		+	definitions. Level and matrix data CAN be exported from beta versions and imported to this version. All
		+	later versions are expected to preserve backward compatibility with this version.
		+	Plots of collision functions cannot be generated for all states.

		+	===Recommendations===

		+	To migrate from a beta version to version 1.2.0, export the level scheme and matrix, then import them into a
		+	new session in this version.

Hayes at 20:38, 25 May 2012

2012-05-25T20:38:30Z

← Older revision		Revision as of 20:38, 25 May 2012
Line 2:		Line 2:

	=Versions 1.x=		=Versions 1.x=
		+
		+	==Version 1.2.0==
		+	(not yet released)
		+
		+	===Expected Changes===
		+
		+	The normalization of calculated yields to experimental yields in the GUI now matches the normalization used by Gosia. The previous Rachel versions weighted yields by their fractional errors when calculating the normalizations. This can make plotting and understanding the chi-squared values confusing. For example, when low-intensity gamma-ray yields are poorly reproduced, the high-intensity yields can appear to be poorly reproduced.
		+
		+	The new method in version 1.2.0 weights the individual yields' contributions to the normalization factor by their intensity only.
		+
		+
		+
		+
		+

	==Version 1.1.5==		==Version 1.1.5==

Hayes: /* Known bugs and issues */

2012-04-30T15:14:16Z

Known bugs and issues

← Older revision		Revision as of 15:14, 30 April 2012
Line 25:		Line 25:
	In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.		In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.

-	Level schemes that do not have spins in order of increasing energy within a band, e.g. 1-, 0-, 3-, 2-..., will cause errors in generating the Gosia input, and the full yield data set may not be passed to Gosia for fitting matrix elements. The expected date for the bug fix is not known. In the meantime, separate each state to a separate band.	+	Level schemes that do not have spins in order of increasing energy within a band, e.g. 1-, 0-, 3-, 2-..., will cause errors in generating the Gosia input, and the full yield data set may not be passed to Gosia for fitting matrix elements. The expected date for the bug fix is not known. In the meantime, separate each state to a separate band. (It may be sufficient to separate the ground state and put it in band #1, then put all remaining states in another band.) Be sure to check the K values that the GUI has assumed and normalization constants for the Alaga rule compared to the in-band rotor model.

	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.		In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.

Hayes: /* Known bugs and issues */

2012-04-30T15:06:50Z

Known bugs and issues

← Older revision		Revision as of 15:06, 30 April 2012
Line 25:		Line 25:
	In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.		In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.

-	Level schemes that have ~~the~~ spins ~~not~~ in order of increasing energy within a band, e.g. 1-, 0-, 3-, 2-..., will cause errors in generating the Gosia input, and the full yield data set may not be passed to Gosia for fitting matrix elements. The ~~bug will be fixed in~~ the ~~next~~ bug-fix ~~version~~. In the meantime, separate each state to a separate band.	+	Level schemes that do not have spins in order of increasing energy within a band, e.g. 1-, 0-, 3-, 2-..., will cause errors in generating the Gosia input, and the full yield data set may not be passed to Gosia for fitting matrix elements. The expected date for the bug fix is not known. In the meantime, separate each state to a separate band.

	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.		In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.

Hayes at 15:00, 30 April 2012

2012-04-30T15:00:57Z

← Older revision		Revision as of 15:00, 30 April 2012
Line 25:		Line 25:
	In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.		In all versions to date, the sensitivity map (OP,MAP) is calculated in the same Gosia call that does a fit (OP,MINI). This works in most cases, but it may cause errors occasionally in inverse-kinematics calculations. (This is not confirmed, but the error will be reported if it occurs.) The sensitivity map will be calculated in a separate call in the next bug-fix version.

-	Level schemes that have the spins not in order of increasing energy, e.g. 1-, 0-, 3-, 2-..., ~~in the ground band may likely~~ cause errors in Gosia ~~calculations~~, and the full yield data set may not be passed to Gosia for fitting matrix elements. The bug will be fixed in the next bug-fix version. In the meantime, ~~put the ground~~ state ~~in one band (band #1 as usual) and the remaining states in the band in another~~ band.	+	Level schemes that have the spins not in order of increasing energy within a band, e.g. 1-, 0-, 3-, 2-..., will cause errors in generating the Gosia input, and the full yield data set may not be passed to Gosia for fitting matrix elements. The bug will be fixed in the next bug-fix version. In the meantime, separate each state to a separate band.

	In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.		In all versions, it is possible to save an empty session over an existing session. Frequent backups of the working directory should be made.