Rachel 1.0 tutorial videos

These tutorials are listed by procedure, in the typical ordering of procedures.  They are all in MP4 format.  If they do not play properly, you probably need a new browser plugin for MP4.

The approximate running time is shown after each link.

===Procedures in the usual order===

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/installation.html Installation]  5 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/read_level_schemes.html Level schemes]  5 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/add_matrix.html Adding the matrix]  5 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/set_fit_parameters.html Setting fit parameters]  4 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/add_experiments.html Adding experiments]  7 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/stopping_power.html Calculating accurate stopping power, exit energy and range]  5 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/define_ge_crystals.html Defining Ge detector types]  4 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/attach_ge_detectors.html Attaching Ge detectors and arrays (laboratory positions)]  4 minutes

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/nuclear_data.html Adding nuclear data to a fit]  4 minutes
Adding previously-measured lifetime or matrix element data is usually vital to finding a unique fit in few-state systems.

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/loading_yield_data.html Loading yield data]  4 minutes

===Other functions===

[http://www.pas.rochester.edu/~hayes/rachel_1_videos/math_interpreter.html Using the math interpreter]  2 minutes