Rachel format detector array files

Rachel can add an entire Ge detector array in one step by choosing option "id" from the Tools button menu.  This allows a user to read an array of detectors consisting of any combination of individual crystals and/or summed clusters.  

Each individual crystal or cluster corresponds to a single data set in the experiment to which it is attached (following the requirements set by Gosia).  These data sets can be filled in one of three ways:

# Simulating data for the entire experimental setup using the "Make simulated yields" function in the first pull-down tab to the left of the "Go" button
# Importing yields for each detector in each experiment using the "Import yields" button
# Specifying the Radware AGS or Rachel text format data file for each detector in the detector array file (see below).  Note that with this option, the detector array file must specify the data file name for each detector 'in each experiment.'

==Examples==

===An array of single Ge crystals===

The following example reads an array of 4 crystals of type "Crystal01," all at azimuthal angle 90 degrees.  The first detector is at polar angle 45 degrees; the second is at 60 degrees, etc.

Each crystal is specified to read a [[Rachel_yield_data_files|Rachel format yield data file]].  This format is indicated by the label "txt" in the 5th field of the line.  The first crystal will auto-load data from file "yields_expt_1_crystal_1.txt".

<pre>
# An array of 4 Ge crystals
crystal Crystal01  45.  90. txt yields_expt_1_crystal_1.txt
crystal Crystal01  60.  90. txt yields_expt_1_crystal_2.txt
crystal Crystal01  90.  90. txt yields_expt_1_crystal_3.txt
crystal Crystal01  120. 90. txt yields_expt_1_crystal_4.txt
<\pre>